SonnenBatterie 10 performance Enclosure Kit 4000110 – Cover & Wallframe

With the SonnenBatterie 10 performance Enclosure Kit 4000110 you get the original enclosure, cover and wallframe of a sonnenBatterie 10 performance (10p). This kit is intended as an empty enclosure: ideal if you want to move an existing system, rebuild the electronics & battery modules from a faulty enclosure, or need an extra enclosure for expansion.

The kit consists of a sturdy metal wall hinge cabinet with removable cover, integrated battery holder and wall frame/mounting frame on which the full sonnenBatterie 10 performance can be built. This is original Sonnen hardware, not a universal “no name” cabinet.

What is included in the SonnenBatterie 10 performance Enclosure Kit?

• Metal enclosure for sonnenBatterie 10 performance (10p).
• Front cover / top cover with sonnen design.
• Internal battery holder (battery tray) for the modular battery modules.
• Wall frame for secure wall mounting.

Important: this kit contains no battery modules, no power unit and no electronics. It is purely about the mechanical cabinet + mounting.

Application – when do you need this enclosure kit?

• You have a complete sonnenBatterie 10 performance whose cabinet is damaged (transport/water damage) and you want to rebuild the internal components.
• You want to move an existing sonnen system to another room and choose to work with a fresh enclosure in the new room.
• You are building a new or refurbished system based on original Sonnen modules and are looking for a suitable enclosure.
• You have a separate performance extension kit and need another <strong(enclosure) as an extension cabinet alongside an existing installation.

Key features SonnenBatterie 10 performance enclosure

• Brand: Sonnen
• Type: SonnenBatterie 10 performance enclosure kit (cover & wallframe)
• Manufacturer number: 4000110
• Suitable for: sonnenBatterie 10 performance (10p)
• Contents: enclosure, cover, battery holder, wall frame
• Material: powder-coated steel case (white/anthracite, depending on series)

Dimensions & weight (indicative)

• Height: approx. 1840 mm
• Width: approx. 690 mm
• Depth: approx. 360 mm
• Dead weight of empty cupboard: approx. 55-67 kg

The exact values may vary slightly per batch, but give a good idea of the space you need against the wall and on the floor.

Installation tips – what do you pay attention to when mounting?

• 1. Choose a supporting wall
  A fully erected sonnenBatterie 10 performance is solid in size and weight. Choose a solid, load-bearing wall (concrete, sand-lime brick, solid brick) and avoid thin plaster walls.
• 2. Sufficient free space all around
  As a rule, keep at least 30 cm space above and 10-15 cm left/right for cooling, cable entry and service. Before your final installation, also check the cable lengths towards the meter box/inverter.
• 3. First level the wall frame
  First mount the wall frame level with the correct jack screws or anchors. Only then hang the cabinet, and then fit the internal battery holder and modules.
• 4. Combine with the right expansion or performance kit
  Use this enclosure in combination with the appropriate sonnenBatterie 10p performance modules and power unit. Make sure the type of battery modules (LFP2, capacity, number of units) matches your design and documentation.
• 5. Always operate voltage-free
  Rebuilding an existing system is work for a certified installer. Make sure AC and DC are completely de-energised, modules are safely switched off and all Sonnen safety regulations are followed.
• 6. Check & leak-check
  After installation, check the cabinet for stable mounting, correct cable entries and seals. Especially when installed in a technical room, decent cable termination is not a luxury.

SonnenBatterie 10 Performance Enclosure Kit 4000110 Buy

At Radiant Green you will find not only inverters and batteries, but also the mechanical parts to build up existing systems neatly and safely. With the SonnenBatterie 10 performance Enclosure Kit 4000110 you have the original enclosure with cover and wall frame, perfect for repairing, moving or expanding your 10p system.

Unsure if this enclosure fits your existing sonnenBatterie modules or power unit? Send us a picture of the nameplate and the inside of your current system, and together we will see if this is the right enclosure for your project.

SonnenBatterie 10 performance Enclosure Kit 4000110 Datasheet EN SonnenBatterie 10 performance Enclosure Kit 4000110 Datasheet EN

Installation manual Sonnenbatterie 10 performance Installation manual Sonnenbatterie 10 performance + Datasheet SOnnenbatterie 10 performance + Datasheet Sonnenbatterie 10 performance NL Datasheet Sonnenbatterie 10 performance EN