FLUID IP44 socket outlet

FLUID IP44 socket outlet

SKU: 237794

€4.96

Need an extra socket in a place where it sometimes gets a little damp? The FLUID IP44 socket outlet is a surface-mounted socket outlet with hinged cover and protective earth. Handy for shed, carport, technical room or under a roof.

This version is very practical: cable entry is possible at the top or bottom, and connection is via plug-in clamp.

  • IP44 splash-proof with hinged cover (for indoors/outdoors under proper mounting)
  • 16A / 250V – 50-60 Hz – 1-gang – 1-phase
  • Grey RAL7035 – dim. 63 × 76 × 57 mm

MPN: 500190

Bezorging op Monday 23 February — voor €5.74 verzonden (met 0% btw).

42 in stock

FLUID IP44 surface-mounted socket outlet with hinged cover – earthing

This is one of those “just right” sockets for places where you’d rather not fiddle with a standard flush-mounted wall socket. The FLUID IP44 socket outlet is a surface-mounted socket outlet with hinged cover and protective earth (Schuko). Perfect for spaces where it can be a bit damp, or where you simply want a robust solution: shed, garage, utility room, technical room, carport or under a canopy.

Practical detail that will make you happy: cable entry can be both above and below. That makes it much easier to keep your cable route tidy (and those nice straight lines… we love those).

Why this FLUID IP44 wcd is so nice

  • Hinged lid: keeps splash water and dirt out better when the wcd is not in use.
  • Surface mounting: ideal on stone, wood, concrete or in rooms where recessed mounting is not convenient.
  • Plug-in connection: quick and neat connection (always follow installation instructions).
Note (IP44 = mounting counts): You will only achieve IP44 if you carry out the lead-throughs and cable route correctly. Use suitable feed-throughs/seals, preferably let cables enter from below (drip-loop), and close the cover neatly.

Technical specifications

Product FLUID IP44 socket outlet (surface-mounted)
EAN (GTIN) 3838959842405
Type/Version FL7035WA-OPEN-EN
Earth Perimeter earth (SCHUKO)
Number of units 1 (1-gang)
Rated current 16 A
Rated voltage 250 V
Frequency 50-60 Hz
Degree of protection IP44
Impact resistance IK03
Colour Grey (RAL 7035)
Surface Matt
Material Plastic (Grade: duroplastic)
Halogen-free No
Connection type Plug-in terminal
Mounting Surface mounting (fastening with screw)
Cable entry Possibleat top and bottom
Dimensions (W × H × D) 63 × 76 × 57 mm

Ideal spots in (and around) PV/EV installations

  • Inverter/technical room: useful for service, laptop/measurement equipment or temporary power supply.
  • Barn/garage: tools, hoover, battery charger… you know the drill.
  • Carport/roof: splash-proof wcd in a practical place (pay attention to mounting and cable entry).
Caution (safety): This is an electrical building element. Work without voltage. Also check that the group/ circuit breaker and earth leakage (protection) are correct in your situation.

Installation tips for a neat, splash-proof assembly

1) Choose the smartest cable entry

  • From below is often the prettiest and most “IP44-friendly” (drip-loop = water does not run inside).
  • Coming from above? Take extra care of sealing and cable routing so that the lid and enclosure close neatly.

2) Mount level (saves irritation)

  • Leveling means: lid closes better, and it just looks professional.
  • Use fastenings that suit the surface (wood/stone/concrete).

3) Connection via plug-in clamp: fast, but precise

  • Strip length and wire end finish according to specifications.
  • Check after connection: tensile test on the wire = peace of mind.

Mini checklist (30 seconds, then you’re done)

  • Housing closes neatly and the hinged lid springs back properly.
  • Cable entry is logical and sealing is in order.
  • Wcd is level and firmly attached (no “wobble mounting”).
Kiyoh reviews