JSL pressure saddle 18-30

JSL pressure saddle 18-30

SKU: 237796

€0.83

Once your cable duct is neatly laid, you want it to stay that way. This JSL pressure saddle 18-30 mm is a sturdy, closed pipe clamp for tightly securing Ø 18 to 30 mm cable ducts – ideal for neat routes in technical areas and around PV installations.

This version is grey, halogen-free and UV-resistant. In short: a small component that immediately makes your installation feel “finished”. (Type 2038, manufacturer’s no. 152100054.)

  • Diameter range: 18-30 mm – for 1 pipe/pipe
  • Material: plastic – fixing: screw hole – model: closed
  • Features: UV-resistant, halogen-free, self-extinguishing 750°C

MPN: 5601859008251

Bezorging op Monday 23 February — voor €5.74 verzonden (met 0% btw).

100 in stock (can be backordered)

JSL pressure saddle 18-30 mm grey (type 2038)

You can build such a beautiful installation – if your pipework then “goes its own way”, it still feels messy. With the JSL pressure saddle 18-30 mm, you secure cable ducts and piping so that your route remains calm, tidy and service-friendly. This not only saves looks, but also hassle when inspecting or expanding.

This pressure saddle is a closed plastic version with screw hole and is made for pipes/tubes with a diameter of 18-30 mm. In addition, it is halogen-free and UV-resistant – nice and practical if you also use it outdoors or in places exposed to sunlight.

Why this pressure saddle is such a nice “installation upgrade

  • Peace of mind in your routing: less movement = less chance of chafing, rattling or pulling on bends and lead-throughs.
  • Neat all at once: you can immediately see the difference between “just fixed” and “professionally mounted”.
  • Suitable for indoor and outdoor use: UV-resistant and halogen-free, so widely applicable.
Please note (diameter = outside diameter): 18-30 mm is the outside diameter of your pipe/pipe. Please measure, especially with flex tubes or other types. Does it just not fit? Don’t force it: choose the right size.

Technical specifications

Brand JSL
Type 2038
Manufacturer number 152100054
GTIN/EAN 5601859051097
Diameter 18 to 30 mm
Number of cables/tubes 1
Execution Closed
Type of fixing Screw hole
Material Plastic
Colour Grey
UV-resistant Yes
Halogen-free Yes
Self-extinguishing 750°C
Low smoke Yes
Resistant to Acid and alkaline solutions
Operating temperature -15°C to +90°C
With distance to the wall No
Suitable in fire resistant area No
Surface protection Untreated
Note (application): This pressure saddle is intended for general fixing of 1 pipe/pipe and is not intended as a solution for fire protection zones or special fire compartment requirements. If your project falls under these: match the fixing to the requirements of the project.

What do you use it for nicely often?

  • Technical area: tight pipework towards inverter, meter box or distributor.
  • Around PV: pipe routes to roof penetrations, cable ducts or wall sections you want to fix neatly.
  • Transitions and bends: precisely where piping would otherwise be under tension.

Installation tips (to keep it looking sleek)

1) Route first, then fix it

  • Lay out your pipe route and determine bends, penetrations and end points.
  • Pro-tip: place a pressure saddle just before and just after a bend/throughput. Then your pipe will stay relaxed.

2) Screw hole fitting without fuss

  • Use fasteners that suit your surface (wood/stone/concrete/steel).
  • Don’t over-tighten: you want to fix, not deform.

3) Mini-check (1 minute, and you’re done)

  • Diameter correct: outer diameter really falls within 18-30 mm.
  • No sanding points: pipe runs freely and does not touch sharp edges.
  • Route “quiet”: no pull on bends or penetrations.
Weight 0.0049 kg
Dimensions 3.2 × 2.5 × 1.5 cm
Kiyoh reviews