BYD LVS Connector set 50 mm²
Make your own neat and safe battery cable set for your BYD Battery-Box Premium LVS with this BYD LVS connector set for 50 mm² DC cable. The set contains male + female LVS connectors and is designed to connect directly to the LVS connection ports of the battery (PDU).
What can you do with it?
-
Customise your own cables – perfect if you need a specific length or route.
-
Safe, matching coupling – original LVS connectors for 50 mm² fine-stranded DC cable.
-
Specific for BYD LVS – intended for the Premium LVS (low-voltage) series; not for HVS/HVM/LVL.
Contents & compatibility.
-
1× LVS male + 1× LVS female connector for 50 mm² cable.
-
Fits BYD Battery-Box Premium LVS (PDU connectors), making it suitable for connection between battery tower and inverter/divider.
Tip Radiant green
Want ready-made cables? There are pre-assembled LVS cable sets (e.g. 2× 2.5 m, 50 mm² NSGAFÖU) with BYD connector on the battery side and M8 cable lug on the inverter side. Handy if you don’t want to press.
Installation tips for the installer
-
Tools – use a hydraulic/hex press with the appropriate 50 mm² jaw. Perform a tensile test after pressing. (50 mm² is required by the connector-do not use 35 mm² with this kit).
-
Polarity & routing – keep +/- consistent; lay cables short and stress-free.
-
Connect to PDU – lock LVS connectors fully; check for click/lock and tighten protection.
-
Inverter side – use suitable cable lugs (often M8) and the correct tightening torque according to the inverter manufacturer. (See examples in pre-assembled kits).
-
Safety – work de-energised; follow BYD manual. Use cable grommets, conductor end sleeves and strain relief where necessary.
Specifications (in summary)
-
Type: BYD LVS connector set (male + female)
-
Cable cross-section: 50 mm² fine-stranded copper
-
Application: DC connections with BYD Premium LVS PDU / battery tower