Growatt HVC 60050-C2 BMS (+cable)

Growatt HVC 60050-C2 BMS (+cable)

SKU: 229077

Original price was: €470.00.Current price is: €335.00. (0% BTW)

Growatt HVC 60050-C2 – BMS/BCU for ARK HV batteries, now including SPH cable set.
Plug-and-play with SPH inverters, cell monitoring and safe charge/discharge control. Quick commissioning and clean installation on the ARK stack.

MPN: HVC 60050-C2 (incl. kabel, geen base)

Out of stock

Growatt HVC 60050-C2 – BMS for ARK HV (incl. SPH cable set)

The Growatt HVC 60050-C2 is the battery management system unit (BMS/BCU) for the
Growatt ARK high-voltage battery system. This version is supplied with a cable set for SPH inverters
(communication & power supply), so you no longer need to order a separate set. Place the BMS on top of the ARK stack;
It monitors the cells, balances, communicates with the inverter and ensures safe charge/discharge control.

SPH cable set included

Plug-and-play with Growatt SPH (3-phase); no additional cable set required.

Safety functions

Cell monitoring, temperature/current limits, pre-charging and fault diagnosis in the BMS.

Seamless ARK integration

Compatible with ARK HV modules (H-A1). BMS on top of the stack, mains connection and cable routing.

Simple commissioning.

Automatic detection via the inverter; parameters and firmware via Growatt tools.

Application & compatibility

  • Inverter: Growatt SPH series (hybrid, 3-phase). Cable set for SPH is included in the scope of delivery.
  • Batteries: Growatt ARK HV (e.g. ARK-2.5H-A1 modules). Minimum number of modules per stack according to ARK specification.
  • Measurement: Use a Growatt 3-phase smart meter for export limitation and intelligent control.

Technical functions (short)

  • BMS/BCU for HV stack: cell equalisation, SOC/SOH calculation, temperature/current protection.
  • Communication to the inverter (including CAN/RS-485, depending on model), status LEDs.
  • Installation position: on top of the ARK stack; fixed data and DC connections with upper battery module.
  • Firmware: updateable via inverter/monitoring; logical menus for commissioning.

Installation instructions

  1. Installation – first place the required minimum number of ARK-HV modules, snap on the BMS as the top unit and fasten according to the instructions.
  2. Coupling SPH – use the supplied cable set (communication + power supply). Lay shielding neatly and maintain distance from AC power cables.
  3. Smart Meter – mount the electricity meter directly behind the main connection for correct import/export measurement and battery logic.
  4. Commissioning – via the inverter menu: Select battery type ARK HV, initialise SOC, set charge/discharge rules and test export limit.
  5. Thermal & local conditions – Place the stack in a flat, ventilated location; avoid direct sunlight and temperatures below freezing during installation.
Green tip from Radiant: Are you updating an existing system? Check the firmware versions of the SPH and BMS
and update them first if necessary. This will avoid messages about an invalid battery configuration or communication timeouts.

What’s in the box?

  • Growatt HVC 60050-C2 BMS unit (BCU/attachment unit)
  • SPH cable set (communication and power cable to the inverter)

Merk

Growatt
Kiyoh reviews