HYXi HALO (HYX-MS6000AC) – plug & play home battery 3 kWh

The HYXi HALO (model HYX-MS6000AC) is a smart, compact AC-connected home battery with approximately 3.0 kWh of storage (nominal 3014 Wh). Thanks to its LiFePO4 chemistry(cobalt-free) and sturdy IP66 casing, this is a robust solution for those who want to get more out of their own solar power, without an immediate complete PV system conversion.

The HALO is designed as a plug & play concept with LED display + app and wifi/bluetooth communication. Useful for monitoring, insight and (depending on configuration) smart control of consumption and tariffs.

What can you do with it?

• Increase your own consumption – store solar power and use it later.
• Peak attenuation – provide temporary power at higher consumption.
• Back-up capabilities – there is an off-grid AC terminal for emergency power scenarios (always design properly with a separate back-up group).

Key technical highlights

• Battery chemistry: LiFePO4
• Storage (nominal): 3014 Wh (≈ 3.0 kWh)
• Service life: up to ≥10,000 cycles (specified at 25°C)
• Warranty: 10 years (manufacturer’s specification)
• Protection: IP66
• Cooling: natural cooling (no active fan)
• Communication: wifi / bluetooth

Power & connections (practically explained)

The HYXi HALO has connection options for both on-grid and off-grid (emergency power) via AC terminals:

• On-grid AC output (nominal): 800 W (Default) or 1500 W (Premium)
• Max. AC apparent output: 1500 VA (without battery pack) / 3000 VA (with battery pack)
• Rated AC voltage: 220 / 230 / 240 V (range 183-276 V)
• Frequency: 50/60 Hz (wide range)
• Power factor: adjustable (0.8 capacitive to 0.8 inductive), Default >0.99
• Harmonics (THD): < 3%

Tip: the exact “Default/Premium” behaviour depends on the configuration/settings and the chosen version. We will gladly help you determine what makes sense for your situation.

Installation tips (short but important)

• 1. Placement
  Mount on a solid, level surface. Keep space all around for heat dissipation (natural cooling) and for service.
• 2. Back-up (off-grid) = separate group
  Do you want to use emergency power? Then make a separate backup group/distribution board with only critical consumers. Never put “the whole meter box” on off-grid just like that.
• 3. Connect according to the standard
  This is AC equipment. Protection, cable diameter and earth leakage/protection devices must match the installation (NEN1010). Preferably have this checked/performed by an installer.
• 4. Temperature & service life
  LiFePO4 likes “normal” temperatures. Avoid full sun behind glass or a too warm technical room: this helps for lifespan and performance.
• 5. App & connection
  Provide stable wifi at the installation site (or go for bluetooth/mesh solution). Then you have instant insight into storage, charging/discharging and status.

Buy HYXi HALO from Radiant Green

The HYXi HALO is a cool plug-and-play home battery for those who want to start storing quickly, with a solid IP66 casing, LiFePO4 technology and handy app monitoring. Would you like us to see if this fits your PV inverter, meter box and desired (emergency power) set-up? Just send us your situation/plot, and we will think along with you technically.