Schnabl Euro-Clip EC19 cable tube clamp 19mm (Hemmink)
When your ductwork is neatly laid, your whole installation immediately feels “finished”. The Schnabl Euro-Clip EC19 is a cable tube clamp for 19 mm installation tube (¾” / 18.5-19.5 mm) that you assemble super fast: drill, attach, done. No fuss, no prying – just tight pipework that stays put.
We sell this EC19 as a variable product in 3 colours. Because sometimes you want it to fall away (grey), and sometimes you just want your sight installation to look neat (white or black).
Why EC19 works so nicely (especially in PV and technical areas)
- Peace in your routing: pipe stays in place, so less chance of moving, chafing or “just too much tension” on bends and lead-throughs.
- Service-friendly: retrofitting or checking later is just… easier if everything is straight and logical.
- Outdoorproof: UV-resistant and temperature-resistant for installations that have to endure.
Technical specifications
| Series | Euro-Clip |
|---|---|
| Type | EC19 |
| Suitable for pipe diameter | 18.5-19.5 mm (¾”) |
| Material | ABS plastic |
| Halogen-free | Yes |
| UV-resistant | Yes |
| Temperature range | -20°C to +85°C |
| Max. number of tubes | 1 |
| Rowable | Yes |
| Mounting | Drilling + fixing (exact fixing method: check in data sheet) |
Installation tips for a route that will make you happy later on
1) Fix the “critical points” first
- Start at bends, penetrations, eaves and transitions.
- Pro-tip: place a clamp just before and just after a bend. Then you avoid pulling on your pipe.
2) Distance between clamps
- Keep it tight and logical: distribute straight sections neatly, and extra support where your tube can work differently.
3) Consider expansion (outside = temperature)
- Leave tube “relaxed”. No torsion, no tension, no net-tightness.
- After assembly, check that the tube cannot rub along sharp edges anywhere.
