StorEdge SE4000H single-phase hybrid inverter

The StorEdge SE4000H 1-phase is the ideal solution for a 1-phase installation with home battery. It is actually a Solaredge HD Wave single-phase inverter with a built-in SESTI Interface from Solaredge, making installation less time-consuming!

You can connect an LG chem RESU10H Prime, or a SolarEdge Home Battery 10kWh High voltage to the StorEdge SE4000H. As with a traditional Solaredge system, you need to fit each panel with an optimiser and the inverter is easy to set up with the SetApp.
SolarEdge inverters are known for maximising power by optimising each panel individually using power optimisers. Very useful if you have a shadow plane moving across all the solar panels during the day, or if you want to use many different orientations.

For an inverter like this to work, all the panels in the set must be fitted with a SolarEdge optimiser. You can connect the StorEdge SE4000H 1-phase to the internet using an Ethernet cable. Wifi connection can be achieved through a Solaredge Antenna.

You may connect a maximum peak power of 6200wp to the StorEdge SE4000H 1-phase, but it will never convert more than 4000watt at a time. The inverter needs at least 8 of the S440 or S500 optimisers to work and at least 6 with the S500B optimiser, you don’t need to connect a home battery right away you can add this later!

The factory is in Israel and offers a 12-year warranty.

For more information, also check out the datasheet, or SolarEdge‘s website.