Zappi smart charging station 3 phase – socket version

Zappi smart charging station 3 phase socket version

Did you know that most electric cars are charged with power from coal-fired power plants? Now go for truly green charging with the zappi smart charging station 3 phase socket version!

Zappi charging station 3 phase is distinguished by the use of CT clamps. This allows zappi to know how much power would be delivered back. In Eco+ charging mode, zappi charges the car only with power from the solar panels! Of course, there are times when the car needs to be charged faster, so Eco and Fast modes are also available. Even without solar panels, zappi works perfectly as a fast charger for the electric car. With comprehensive manuals, the zappi smart charging station 3-phase is easy to install yourself.

The zappi charge post 3 phase charges with up to 22kW and features load balancing. Make efficient use of the main connection without overloading the fuses. Thanks to that load balancing, zappi may be fused to the size of the main connection. On a 3×25 ampere mains connection, zappi can therefore be fused at 3×25 amps! Zappi 3 phase charging station is 362mm high, 220mm wide and 78mm deep.

This version of the smart charge post 3 phase is equipped with built-in Ethernet and wifi connection. So no hub is needed anymore to connect zappi to the internet. The myenergi app shows with clear graphs the energy balance in the house. Moreover, zappi can be remotely controlled and provided with updates. Take advantage of the most advantageous charging rates, or remotely turn on the boost function for faster charging. Don’t want to share your 3-phase charging station with everyone? Zappi comes standard with the option to request a 5-digit PIN code for security.

Zappi comes with a 3-year manufacturer’s warranty. Register your zappi here: Register Zappi [embedyt] https://www.youtube.com/watch?v=4-wePwiHsp4[/embedyt]

Zappi charging station 3 phase installation tips

1. Firstly, you always install a zappi together with CT clamps. With a 3 phase zappi, 3 CT clamps are supplied as standard. Is it not possible to connect these wired to Zappi? Then use the Harvi smart current sensor! Connect the CT clamps to the Harvi, and connect Harvi wirelessly to Zappi.
2. In addition, it is important that the CT terminals CT1, CT2 and CT3 correspond to the correct phases L1, L2 and L3 across the line. This can still be complicated, but with a phase rotation meter, it’s a breeze!
3. Provide zappi with additional CT terminals via a harvi to give additional information about the production of your solar panels. This is not necessary for load balancing to work, but nice if you want to be able to view everything in 1 app.
4. Finally, also click through the datasheet, or check out Myenergi ‘s website for more information.
5. Note! Do you have a Hyundai Kona of the 2020 model year? Stop by the dealer for a critical software update, before charging it with the Zappi!