Easee Charge Max 22kW charging station MID type 2 socket – black (10233)

The smart Easee Charge Max 22kW charging station for home and business

EV home charger with MID-certified energy meter

The Easee Charge Max 22kW charging station is an advanced EV home charger designed to give you full control over your charging costs. Thanks to the integrated MID-certified energy meter, this charging station accurately measures energy consumption with a proven precision of approximately 1%. This means you always receive transparent invoices and can, for example, easily settle the charging costs of your company car. In addition, the station charges all electric and hybrid vehicles with a Type 2 connection, both single-phase and three-phase.

---

Powerful charging with smart phase and load balancing

Up to 22 kW and fully dynamic

This charging station delivers a charging power of up to 22 kW on a 3-phase TN grid (3 x 32 A). This lets you charge your car faster when needed. The charger automatically switches between single-phase and three-phase, depending on the available capacity. As a result, energy consumption remains optimally distributed. In combination with the Easee Equalizer, the station also provides dynamic load and phase balancing, so the main fuse does not become overloaded. Charging with self-generated solar energy is also possible this way. The Easee Charge Max 22kW charging station also continuously receives over-the-air updates, keeping your installation future-proof.

---

Robust design for all weather conditions

IP54, IK10 and smart safety

Easee develops and manufactures this station in Norway, specifically to withstand harsh weather conditions. With an IP54 protection rating and IK10 impact resistance, it is suitable for outdoor use. The operating temperature ranges from -30 degrees to +40 degrees Celsius. In addition, several temperature sensors continuously monitor the main contacts. The integrated type A residual current protection (30 mA AC) and the 6 mA DC residual current detection provide extra safety. The station also protects against overload, overheating and short circuits. So you can rest assured that you are buying a safe product.

---

Installation and mounting in practice

What to pay attention to during mounting

• Fix the backplate with the 4 supplied wall screws to a solid, non-perforated wall.
• Install the charger at a height of 130-140 cm, at an angle of no more than plus/minus 3 degrees from the vertical.
• Place the backplate sheltered from direct rain and direct sunlight, and do not block the MID display on the right-hand side.
• Use a cable cross-section of 2,5 to 16 mm2 (single conductor) and tighten the screw terminal to a torque of 5 Nm.
• Strip each wire by 12 mm and seal all unused cable entries with the supplied blanking plugs.

When mounting, follow the manufacturer’s official installation manual and the applicable regulations. According to the manual, connection to the electricity grid must be carried out by a qualified electrician.

---

Technical specifications

• Maximum charging power: 22 kW (3-phase TN, 3 x 32 A)
• Charging power single-phase: 1,4 kW – 7,4 kW
• Charging power 3-phase IT: 2,4 kW – 12,7 kW
• Charging connector: Type 2 socket (IEC 62196-2, Mode 3)
• Energy meter: MID Class B (plus/minus 1%), EN 50470-3
• Voltage: 3x 230/400 V AC (plus/minus 10%)
• Connectivity: Wi-Fi, Bluetooth 4.2, LTE Cat M1, OCPP 1.6J
• Protection rating: IP54
• Impact resistance: IK10
• Operating temperature: -30 C to +40 C
• Dimensions: 256 x 193 x 106 mm (H x W x D)
• Weight: 1,6 kg
• Colour: black
• Warranty: 5 years
• Product number: 10233

View the datasheet (NL) View the installation manual (NL) View the user manual (NL) View the document (datasheet) (NL)