GoodWe LAN Box – SIB-0060-00-00P

The GoodWe LAN Box (MPN SIB-0060-00-00P) is the wired communication module for GoodWe inverters with a 5-pin communication port. It allows you to stably connect the inverter via Ethernet (10/100 Mbps) to your network and SEMS monitoring, with encryption, breakpoint resumption and remote firmware upgrade.

Plus points

• Wired reliability – high and stable data throughput via RJ45 (10/100 Mbps).
• Data security – support for encryption and storage in case of connection interruption (no data loss).
• Remote service – supports remote upgrade and remote diagnostics.
• IP65 – splash and dust proof, screw mounting directly on/in the inverter.

Compatibility

To be used when your inverter has a 5-pin communication port(LAN Box). If your inverter has a USB port, choose the LAN Kit / Wi-Fi-LAN Kit.

Tip: This LAN Box is often used with GoodWe series with 5-pin port (including several older NS/DNS/SDT/DT variants or conversion kits – check your type number/port type).

Technical specifications

• Power supply/consumption: ~1.5 W via inverter comm port
• Max. inverters: 1 per LAN Box
• Interface inverter: 5-pin
• Ethernet: 10/100 M
• Mounting: screw mounting
• Protection: IP65
• Dimensions: approx. 65 × 115 × 40 mm

Installation tips

1. First check the port type (5-pin vs USB) on the inverter.
2. Mount the LAN Box securely (IP seal intact), connect RJ45 to your router/switch and preferably assign a fixed IP or reserved DHCP lease.
3. Commissioning: configure via local web interface and verify status LEDs and data transfer.