Growatt HVC 60050-A2 Power Module (including cable)

The Growatt HVC 60050-A2 Power Module for your ARK storage system

The smart BMS controller of the Growatt ARK XH battery system

The Growatt HVC 60050-A2 Power Module is the central control unit of the Growatt ARK XH storage system. This module controls and monitors the stacked ARK 2.5H battery modules as the central BMS controller. As a result, the batteries stay at a safe temperature and operate within their optimal window. You need exactly one Power Module per Growatt XH battery system. In addition, we supply this HVC module including the cable between the Power Module and your Growatt SPH inverter, so you can get started right away.

---

Safe control and intelligent battery management

CAN communication and a wide voltage range

The ARK HV system uses cobalt-free LiFePO4 cells (lithium iron phosphate), which are known for their excellent safety and long service life. The Power Module manages the interaction between these modules and the inverter. Thanks to an input and output voltage range of 90 to 585 V, the system adapts flexibly to your configuration. Communication takes place via a CAN port, so the module reliably exchanges data with the inverter. This way you always stay in control of the charging and discharging of your home battery.

---

Robust design for indoor and outdoor mounting

IP65 and a wide operating temperature range

The Growatt HVC 60050-A2 Power Module has an IP65 protection rating. This means the housing withstands dust and water jets, giving you flexibility in placement. In addition, the system operates at temperatures from -10 to 50 °C and even supports charging at low temperatures down to -10 °C. It also tolerates a humidity of 5% to 95%. As a result, your storage system keeps performing reliably in a wide range of weather conditions.

---

Installation and mounting in practice

What to pay attention to during mounting

• Keep at least 300 mm of clearance around the modules for cooling and access.
• With more than four battery modules, choose floor mounting with a base instead of wall mounting.
• Limit wall mounting to a maximum of four modules and make sure the wall can bear more than 150 kg.
• With floor mounting on a base, stack a maximum of ten modules; above six modules, stacking in two rows is recommended.
• Place the system under a sun and rain cover to prevent direct exposure to sun and rain.
• Start the system by switching the residual current circuit breaker to ON and holding down the power button for 5 to 6 seconds.

When mounting, follow the manufacturer’s official installation manual and the applicable regulations.

---

Technical specifications

• Type: Power Module / BMS controller (HVC series)
• Dimensions (W/D/H): 650/260/185 mm
• Weight: 8,5 kg
• Input/output voltage: 90~585 V
• Communication port: CAN
• Compatible system: Growatt ARK XH / HV battery system
• Compatible inverter: Growatt SPH
• System cell technology: cobalt-free LiFePO4 (LFP)
• System IP rating: IP65
• Operating temperature: -10~50 °C
• Humidity: 5%~95%
• System warranty: 10 years
• Delivery: including cable to SPH inverter

View the datasheet (EN) View the installation manual (EN)