Growatt MOD 6000TL3-HU hybrid inverter

Versatile Growatt MOD 6000TL3-HU inverter for your installation

Battery ready hybrid inverter with 6 kW of power

The Growatt MOD 6000TL3-HU inverter is a three-phase hybrid inverter that converts solar energy into usable alternating current and, thanks to the integrated battery function, stores energy for later use. With a nominal AC power of 6000 W and two independent MPPT trackers, you achieve a stable yield from your solar panels even with varying irradiance. In addition, this inverter is ‘battery ready’, so you can easily add a home battery later without an extra backup box.

---

Smart technology and high efficiency

Up to 98,3% efficiency with integrated backup function

The Growatt MOD 6000TL3-HU inverter achieves a maximum efficiency of 98,3% and a European efficiency of 97,8%, so as little energy as possible is lost. The device is also transformerless, which limits losses. Thanks to the dual MPP trackers with a wide voltage range of 140 to 1000 V, you make optimal use of your strings. The inverter also features accurate AFCI arc fault detection and anti-islanding protection, keeping the system operating safely. Because the inverter is compatible with the APX 5.0-30.0P-S2 battery, you can charge at up to 15 kW and discharge at up to 6 kW.

---

Robust design for all weather conditions

IP66 housing with Type II surge protection

Thanks to the IP66 protection rating, you can install this inverter both indoors and outdoors, giving you flexibility in the set-up. The device also operates reliably across a wide temperature range of -25 to +60 °C. The reliable Type II surge protection (SPD) protects both the DC and AC sides against surges, for example from a nearby lightning strike. In addition, the inverter cools completely passively through natural heat dissipation, so no failure-prone fans are needed and the noise level stays low at around 29 dB(A).

---

Installation and mounting in practice

What to pay attention to during mounting

• Mount the inverter at an angle of no more than 15° from the vertical, as specified in the manual.
• Keep at least 500 mm of clearance above, below and beside the housing for sufficient cooling.
• Drill the mounting holes with a Φ8 mm drill bit to a depth of 55 mm.
• Tighten the M5 fixing screws of the inverter to 5 N·m.
• Switch the DC switch to OFF and check that the DC voltage is below 36 V before connecting the cables.
• Use DC cables with a cross-section of 5 mm² to 7 mm², to be supplied by the customer.

When mounting, follow the manufacturer’s official installation manual and the applicable regulations.

---

Technical specifications

• Nominal AC power: 6000 W
• Max. AC apparent power: 6600 VA
• Max. recommended PV power: 12000 W
• Number of MPP trackers: 2
• MPPT voltage range: 140V-1000V
• Max. DC voltage: 1000V
• Start-up voltage: 160V
• Compatible battery: APX 5.0-30.0P-S2
• Max. charging power / discharging power: 15 kW / 6 kW
• Max. efficiency: 98,3%
• European efficiency: 97,8%
• Protection rating: IP66
• Operating temperature: -25°C … +60°C
• Dimensions (W/H/D): 468 x 408 x 202 mm
• Weight: 19 kg
• Warranty: 10 years

View the datasheet (EN) View the certificate (EN) View the certificate (EN) View the certificate (EN) View the certificate (EN/DE) View the quickstart guide (EN) View the certificate (EN) View the user manual (EN)