Huawei SUN2000 12K-MAP0 Smart Energy Controller

Powerful Huawei SUN2000 12K-MAP0 inverter for your installation

12 kW 3-phase Smart Energy Controller with integrated battery interface

The Huawei SUN2000 12K-MAP0 inverter is a powerful 12 kW 3-phase string inverter for larger roofs, farms and small commercial installations. Thanks to a high efficiency of up to 98.6% and an integrated battery interface, you are ready for a home battery straight away. In addition, this Smart Energy Controller has 2 independent MPP trackers, so you can make flexible use of different roof surfaces. With the Huawei SUN2000 12K-MAP0 inverter you build an efficient and future-proof PV system that you follow in full via the FusionSolar app.

---

Advanced technology and active safety

AFCI arc fault detection and three-phase asymmetrical control

This inverter combines a European efficiency of 98.2% with smart protection features. The built-in arc-fault protection (AFCI) actively detects arcs, which improves fire safety. The unit also supports 100% three-phase asymmetrical loading and even 200% overload in off-grid operation. Thanks to connector temperature detection on both the PV and the battery connections, the inverter continuously monitors safety. The system is also prepared for pairing with a LUNA2000 home battery and, combined with a SmartGuard, for a full whole-home backup solution.

---

Robust design for all weather conditions

IP66 enclosure and quiet natural cooling

Thanks to the IP66 protection rating, you can install the inverter both indoors and outdoors. The unit works reliably across a wide operating temperature range from -25 C to +60 C and up to an altitude of 4,000 m. Because cooling runs entirely on natural convection, the noise stays below 29 dB and there are no fans that can wear out. That gives you a quiet and durable system that stands up to demanding conditions.

---

Installation and mounting in practice

What to watch out for during mounting

• Mount the inverter vertically or with a maximum backward tilt of 15 degrees for optimal heat dissipation.
• Keep free space all around: at least 300 mm above, 400 mm below and 350 mm at the sides.
• Use the supplied M6x50 stainless steel expansion bolts and tighten the mounting bracket to 5 Nm.
• Strip the AC wires over 17-19 mm and tighten the wires to 2.8-3.2 Nm.
• Use only the positive and negative DC connectors supplied with the inverter.
• Set the DC SWITCH to OFF before you connect the DC connectors.

When mounting, follow the manufacturer’s official installation manual and the applicable regulations.

---

Technical specifications

• Nominal AC power: 12,000 W
• Grid connection: 3-phase
• Maximum efficiency: 98.6%
• European efficiency: 98.2%
• Recommended max. PV power: 22,000 Wp
• Maximum input voltage: 1,100 V
• Operating voltage range: 160 – 1,000 V
• Start-up voltage: 160 V
• Number of MPP trackers: 2
• Max. input current per MPPT: 16 A
• Max. short-circuit current per MPPT: 22 A
• Max. apparent power: 13,200 VA
• Max. output current: 20.2 A
• Compatible battery: LUNA2000-5/10/15-S0 / 7/14/21-S1
• Max. charging power: 12,000 W
• Operating temperature: -25 C to +60 C
• Cooling: natural convection
• Noise: ≤ 29 dB
• Dimensions (w x h x d): 490 x 460 x 130 mm
• Weight: 21 kg
• Protection rating: IP66

View the datasheet (EN) View the user manual (EN) View the quick start guide (multilingual) View the datasheet (DE)