Sigenergy SigenStor EC 25.0 TP Energy Controller

The Sigenergy SigenStor EC 25.0 TP is a 3-phase hybrid energy controller that integrates solar energy, battery storage and grid connection within one intelligently controlled system. This controller forms the heart of the SigenStor home energy system and has been developed for homes and installations with a higher power demand, a heat pump or EV charging.

With integrated energy management (EMS), 4 MPPT trackers and a high DC/AC ratio, the EC 25.0 TP makes optimal use of the installed PV capacity. In combination with SigenStor battery modules and the Sigen Gateway, this controller offers a fully integrated solution for storage and back-up.

Key features

• 3-phase hybrid energy controller (25 kW)
• Integrated EMS (Energy Management System)
• 4 MPPT trackers (model-dependent)
• Unbalanced 3-phase output for efficient operation
• 150% peak output in off-grid mode
• Back-up support (0 ms switchover in combination with gateway)
• IP66 protection class
• Communication via WLAN / Ethernet / RS485 (4G optional)

Application

The SigenStor EC 25.0 TP is used in:

• 3-phase homes and commercial buildings with a PV installation
• Installations with a heat pump or heavier electrical loads
• EV charging in combination with battery storage
• Systems where phase balance and high power are important
• Installations that require back-up functionality

Technical specifications

Model	SigenStor EC 25.0 TP
Article number	11010018
Phase	3-phase
Nominal AC power (on-grid)	25 kW
Nominal AC power (back-up)	30 kW
Max. PV input	40000 Wp
Number of MPPTs	4
MPPT voltage range	160–1000 V
Start-up voltage	180 V
Max. DC input voltage	1100 V
Compatible battery	SigenStor BAT series (1–6 units)
Dimensions (W x H x D)	70 x 30 x 26 cm
Weight	36 kg
Protection class	IP66
Communication	WLAN / Ethernet / RS485 (4G optional)
Operating temperature	-30 to 60 °C

Installation & system integration

The EC 25.0 TP works within the complete Sigenergy ecosystem:

• SigenStor BAT battery modules
• Sigen Gateway (for emergency power/back-up)

Installation tips

• Plan the phase distribution carefully when combining with a heat pump or EV.
• Check the string distribution across the MPPTs for optimal yield.
• Carry out full commissioning via the Sigenergy app or portal.
• Check the firmware of the controller, battery and gateway at handover.

Datasheet Sigenstor Home installation manual

Warranty extension

5-year warranty extension

Technical data

Model: SigenStor EC 25.0 TP

Article number: 11010018

Phase: 3-phase

Nominal AC output (on-grid): 25 kW

Nominal AC output (backup): 30 kW

Maximum PV input: 40000wp

Number of MPPTs: 4 trackers

MPP voltage range: 160-1000 volt

Start-up voltage: 180 volt

Compatible battery: SigenStor BAT series (1-6 units)

Dimensions (Width x Height x Depth): 70 x 30 x 26 cm

Weight: 36kg