Sigenergy SigenStor EC 8.0 TP Energy Controller

The Sigenergy SigenStor EC 8.0 TP is a 3-phase hybrid energy controller that integrates solar energy, battery storage and grid connection within a single, intelligently controlled system. This controller forms the heart of the SigenStor home energy system and has been developed for homes and installations with a higher power demand, a heat pump or EV charging.

With integrated energy management (EMS), 2 MPPT trackers and a high DC/AC ratio, the EC 8.0 TP makes optimal use of the installed PV capacity. In combination with SigenStor battery modules and the Sigen Gateway, this controller offers a fully integrated solution for storage and back-up.

Key features

• 3-phase hybrid energy controller (8 kW)
• Integrated EMS (Energy Management System)
• 2 MPPT trackers (model-dependent)
• Unbalanced 3-phase output for efficient operation
• 150% peak output in off-grid mode
• Back-up support (0 ms switchover in combination with gateway)
• IP66 protection class
• Communication via WLAN / Ethernet / RS485 (4G optional)

Application

The SigenStor EC 8.0 TP is used for:

• 3-phase homes and commercial premises with a PV installation
• Installations with a heat pump or heavier electrical loads
• EV charging in combination with battery storage
• Systems where phase balance and high power output are important
• Installations where back-up functionality is required

Technical specifications

Model	SigenStor EC 8.0 TP
Article number	11010012
Phase	3-phase
Nominal AC power (on-grid)	8 kW
Nominal AC power (back-up)	12 kW
Max. PV input	12800 Wp
Number of MPPT	2
MPPT voltage range	160–1000 V
Start-up voltage	180 V
Max. DC input voltage	1100 V
Compatible battery	SigenStor BAT series (1–6 units)
Dimensions (W x H x D)	70 x 30 x 26 cm
Weight	36 kg
Protection class	IP66
Communication	WLAN / Ethernet / RS485 (4G optional)
Operating temperature	-30 to 60 °C

Installation & system integration

The EC 8.0 TP operates within the complete Sigenergy ecosystem:

• SigenStor BAT battery modules
• Sigen Gateway (for emergency power/back-up)

Installation tips

• Plan the phase distribution carefully when combining with a heat pump or EV.
• Check the string distribution across the MPPTs for optimal yield.
• Carry out full commissioning via the Sigenergy app or portal.
• Check the firmware of the controller, battery and gateway at handover.

Datasheet SigenStor Home installation manual

Warranty extension

5-year warranty extension

Technical data

Model: SigenStor EC 8.0 TP

Article number: 11010012

Phase: 3-phase

Nominal AC output (on-grid): 8 kW

Nominal AC output (backup): 12 kW

Maximum PV input: 12800wp

Number of MPPT: 2 trackers

MPP voltage range: 160-1000 volt

Start-up voltage: 180 volt

Compatible battery: SigenStor BAT series (1-6 units)

Dimensions (Width x Height x Depth): 70 x 30 x 26 cm

Weight: 36kg