SolarEdge Power Optimizer P485 Rails Mounted

Original price was: €56.23.Current price is: €35.00. (0% BTW)

The SolarEdge power optimiser P485 is suitable for solar panels up to 485 watt peak. The minimum string length for these power optimisers is 8 with a single-phase inverter, or 16 with a three-phase inverter.

Mount this SolarEdge power optimiser P485-5R M4M RM on the mounting rails with a bolt and channel nut, or 2 self-tapping screws. Mounting to the panel frame is also possible with a bolt and lock nut.

Please note! Only works in combination with SolarEdge inverters.

Datasheet

MPN: P485-4RM4MRM

Bezorging op Tuesday 15 September — voor €6.95 verzonden (met 0% btw).

1 in stock

SolarEdge Power Optimizer P485 – Rail Mounted

Name: SolarEdge Power Optimizer P485 Rails Mounted
Brand: Solaredge
SKU: 129226
Price: 35.00 EUR
Availability: InStock

The SolarEdge P485 is a rail-mounted power optimiser for a single solar panel.
Perfect when you want to install quickly, neatly and safely on residential or small commercial roofs.
You get panel-level MPPT for maximum kWh, SafeDC™ for voltage reduction on shutdown
and full panel monitoring in the SolarEdge platform—with the housing mounted directly onto the mounting rail.

Rail-mounted installation

Quick attachment to the mounting rail—no screw into the panel frame, tidy cable routing.

Panel-level MPPT

Minimises mismatch and shading losses for a noticeably higher annual yield.

SafeDC™ safety

Automatic voltage reduction per optimiser in the event of grid or inverter failure.

Monitoring per panel

See performance and fault messages per module in the SolarEdge portal.

Application & compatibility

One panel per optimiser; ideal with different orientations/tilts and (partial) shading.
Compatible with SolarEdge 1- and 3-phase inverters that support the P-series.
Suitable for modern high-efficiency panels; choose the P485 when you want a single-module solution and rail mounting.

Installation tips

Mounting – clip/screw the P485 onto the mounting rail. Keep ventilation space all around underneath the panel.
DC connection – use MC4-compatible connectors; click fully home until you hear a “click” and carry out a pull test.
Cable management – route the longer positive lead tightly along the rail/frame to the next module; respect the bending radius.
Commissioning – follow the SolarEdge procedure: module mapping, insulation measurement and checking SafeDC behaviour before switching on.

Technical features

Type: single-module, rail-mounted power optimiser
Safety: SafeDC™ (low voltage on shutdown)
Protection: outdoor-durable, high-quality sealed housing (IP class according to SolarEdge specification)
Connectors: MC4-compatible; long positive lead for series routing
Monitoring: panel level via the SolarEdge platform

Stralendgroen tip: Always design strings on cold Voc and check the minimum/maximum
string length and inverter compatibility in SolarEdge Designer—especially with mixed orientations and cold winters.