In stock
Solaredge P505

SolarEdge Power Optimizer P750

SKU: 228963

€35.00 (0% BTW)

SolarEdge P750 – single-input power optimiser for one high-power PV module. 750 W, 20 A Isc, panel-level MPPT and SafeDC™, compatible with SE16K up to SE40K. Ideal for commercial roofs and large fields.

Datasheet

MPN: P750-4RMLMBN

Delivery on Tuesday 29 September — for €6.95, shipped (incl. 0% VAT).

2 in stock

SolarEdge Power Optimizer P750

The SolarEdge P750 is a single-input add-on optimiser for one high-power solar panel per optimiser.
Developed for commercial roofs and large fields with three-phase SolarEdge inverters (SE16K and larger). You get
panel-level MPPT, SafeDC™ (±1 V in standby) and a 25-year warranty, with single-bolt mounting and fewer BOS components
thanks to longer string lengths.

For high-power & bifacial

Up to 750 W per optimiser, supports 20 A Isc—ready for modern TOPCon/bifacial modules.

High efficiency

Max. 99,5% (weighted 98,6%) for minimal conversion losses.

Safe & robust

SafeDC™, IP68, −40…+85 °C and VDE-AR-E 2100-712 fire safety.

Fast installation

One bolt on rail/frame, MC4 in/out and a long outgoing plus cable for a tidy series route.

Key specifications P750

Nominal PV input power 750 W (1× module, single input)
MPPT range / max. Voc (in) 12,5–60 V / 60 V (at lowest temp.)
Max. short-circuit current (Isc) module 20 A
Max. output current / max. output voltage 18 A / 80 V
Efficiency max. 99,5% • weighted 98,6%
SafeDC™ (standby) ~1 V per optimiser
System voltage 1000 V DC max.
Dimensions / weight 129 × 162 × 59 mm / 979 g
Cables & connectors MC4 in/out; input 0,9 m • output (portrait) 1,4 m
Protection IP68 • −40…+85 °C • Overvoltage Cat. II

Design & compatibility

  • Inverters: three-phase SolarEdge SE16K, SE17K, SE25K, SE27.6K, SE30K, SE33.3K, SE40K (Synergy equivalents as well).
  • String rules: min. 14 and max. 30 optimisers per string (typical, depending on type).
  • Mixing: within one string only P750 with P750; do not mix P- and S-series in new installations.
  • Power limits: see the datasheet for the max. (continuous/connected) string power per inverter type.

Installation tips

  1. Mounting – fasten with one bolt to the rail or frame; leave ventilation space underneath the panel.
  2. DC side – use MC4, click fully home (pull test), check polarity and insulation resistance.
  3. Module choice – connect one module per P750; mind the 60 V Voc limit and 20 A Isc.
  4. String design – design for frost Voc and observe the min/max string length; verify in SolarEdge Designer.
  5. Commissioning – follow the SolarEdge procedure; module mapping and SafeDC check before switching on.
Datasheet
Weight 0.979 kg
Dimensions 16.2 × 12.9 × 5.9 cm
Kiyoh reviews