Wallbox Pulsar Max 22 kW 3-phase – 5m cable complete kit (MPN: K1PLP2-0-2-4-9-002)
This is the complete Wallbox Pulsar Max kit for anyone who wants to be ready in one go: you get the Wallbox Pulsar Max 22 kW (3-phase) with a 5 metre fixed Type 2 cable, plus the 3-phase Wallbox power meter for load balancing (Power Boost) and a plug/cable holder for a tidy finish. Ideal if you want to charge at maximum power while staying safely within the limits of your home connection.
Thanks to the power meter, the system continuously measures total household consumption and the Pulsar Max automatically adjusts the charging power. This prevents the main fuse from tripping when you are cooking, running the heat pump and charging your car at the same time. And with the supplied plug/cable holder, your charging spot stays neat and tidy.
What is included in this complete kit?
- Wallbox Pulsar Max 22 kW – 3-phase wallbox with a fixed 5m Type 2 charging cable.
- 3-phase power meter – for Power Boost (dynamic load balancing) based on your total consumption.
- Plug/cable holder – to hang up the Type 2 plug neatly and guide the cable properly.
MPN: K1PLP2-0-2-4-9-002
Key benefits
- Charging up to 22 kW (3×32 A) – maximum charging power for cars that support 3-phase AC charging.
- Complete set – no need to source a separate power meter or holder; everything is included.
- Power Boost load balancing – charges as fast as possible without overloading your main connection.
- Fixed 5m cable – always ready to plug in, no loose cable on the ground.
- WiFi + Bluetooth + app – manage charging sessions, scheduling and insights via the myWallbox app.
- Robust – IP55 and IK10: suitable for garage, carport and outdoor installation.
- Built-in safety – 6mA DC leakage detection included; an external type A residual current device is still required.
- Neat finish – with the cable holder your plug hangs tidily and your cable stays in good condition for longer.
Technical specifications (key points)
- Charging power: up to 22 kW (3-phase)
- Connection: 3×400 V AC
- Adjustable current: 6–32 A
- Cable: Type 2, 5 metres fixed
- Protection: IP55 / IK10
- Residual current detection: 6mA DC
- Required residual current device: type A, external
- Operation: myWallbox app (WiFi/Bluetooth)
- Charger dimensions: 198 × 201 × 99 mm (without cable)
What exactly does the 3-phase power meter do?
The supplied 3-phase power meter measures the total power consumption in your home or business. Based on this, the Pulsar Max can automatically:
- reduce the charging power when consumption is high (cooking, heat pump, sauna, etc.),
- increase the charging power when there is capacity available on the connection,
- and thereby greatly reduce the risk of overloading and tripping fuses.
That is exactly why this complete kit is so convenient: you do not have to puzzle over extra meters or accessories afterwards.
Installation tips
- 1. Check your home connection
For 22 kW you usually need 3×32 A. Do you have 3×25 A or 3×16 A? No problem: with load balancing and current limiting you can still charge safely, just at a lower power. - 2. Dedicated circuit + correct protection
Use a dedicated final circuit with a suitable circuit breaker and a type A residual current device. The Pulsar Max has 6mA DC detection, but that does not replace a type A RCD. - 3. Position the power meter correctly
The power meter belongs in or near the meter cupboard so that it can measure the total consumption. Preferably have this done by a certified installer. - 4. Cable holder in a convenient spot
Mount the plug/cable holder next to the charging station, at a height where you can easily hang up the plug and where the cable does not kink. - 5. App configuration
In the myWallbox app, set your maximum current, charging schedules and (if desired) Power Boost parameters, so that everything is perfectly matched to your installation.
Buy the Wallbox Pulsar Max 22 kW complete kit at Stralendgroen
With this Wallbox Pulsar Max 22 kW complete kit you are ready in one go: fast charging, safe load balancing and a neat finish with the cable holder. Ideal for homes and small businesses that want to make the most of 3-phase charging without any hassle.
Not sure whether your meter cupboard is suitable for 22 kW, or would you like to know which cable cross-section and circuit breaker you need? Send us a photo of your fuse box and your desired charging power, and we will be happy to advise you.