In stock
Growatt RF Stick-X, Growatt Wifi-X, Growatt Shine GPRS-X

Growatt RF stick-X

SKU: 128276

€25.00 (0% BTW)

Fits: the USB port of Growatt MIN, MIC, MOD, MID, MAX and SPH-UP, as an extra transmitter on a Shine Link-X. Does NOT fit: SPH/SPA without UP and the old S series (RS232 → RF stick without X), nor the Shine Link LANbox.

The Growatt RF Stick-X serves as an extension to the Shine Link-X. Especially for Growatt’s new XE inverters. Up to 6 inverters can be connected to the Shine Link-X. To connect an additional inverter to the lanbox, you need an additional RF Stick-X, which ensures that your additional inverter can also transmit a radio signal.

Monitor all your inverters via 1 Shine LInk, without having to pull a LAN cable and without using wifi.

For more information, take a look at the Shine Link-X’s datasheet, or visit growatt’s website.

Datasheet

MPN: ShineRFStick-X

Delivery on Friday 16 October — for €6.95, shipped (incl. 0% VAT).

205 in stock (can be backordered)

1 stuk
€25.00
10+ stuks
€22.50 (10% off)

The Growatt RF Stick-X serves as an extension to the Shine Link-X. Especially for Growatt’s new XE inverters.

Up to 6 inverters can be connected to the Shine Link-X. To connect an additional inverter to the lanbox, you need an additional RF Stick-X, which ensures that your additional inverter can also transmit a radio signal.

Monitor all your inverters via 1 Shine LInk, without having to pull a LAN cable and without using wifi.

For more information, see the Shine Link-X datasheet.

Datasheet

Which Growatt dongle fits my inverter?

Growatt has two families of monitoring dongles. Everything with an X or X2 in the name (ShineWiFi-X, Wilan-X2, ShineLAN-X, Shine Link-X/X2, Shine RF Stick X2, Shine GPRS-X) plugs into the USB port. The ShineWiFi-S, Shine Link LANbox and the old ShineLAN plug into the RS232 port. The ShineWiFi-F is only for the off-grid SPF series.

Inverter series Port Correct dongle Note
MIN 2500-6000 TL-X / TL-XE / TL-XH / TL-XH2 USB ShineWiFi-X, Wilan-X2, ShineLAN-X, Shine Link-X/X2 Also Shine GPRS-X (2G/SIM card)
MIC 600-3300 TL-X / TL-X2 USB ShineWiFi-X, Wilan-X2, ShineLAN-X, Shine Link-X/X2
MOD 3-15K TL3-X / TL3-XH (BP and non-BP) / TL3-HU USB ShineWiFi-X, Wilan-X2, ShineLAN-X, Shine Link-X/X2 For the HU series Growatt recommends Wilan-X2 or ShineWiFi-X
MID 11-30K TL3-XH / XHL, MID 17-50K TL3-X / X2 USB ShineWiFi-X, Wilan-X2, ShineLAN-X, Shine Link-X/X2
MAX 50-125K TL3 LV (MAX, MAX 2) USB ShineWiFi-X, Wilan-X2, ShineLAN-X Several inverters: Shine Master X (RS485)
SPH 3000-6000 single-phase without UP (SPH 3000-6000 TL BL) RS232 ShineWiFi-S, Shine Link LANbox (+ RF stick) The ShineWiFi-X does not fit here
SPH 3000-6000 TL BL-UP single-phase USB ShineWiFi-X, Wilan-X2, ShineLAN-X “BL-UP” is printed on the type label
SPH 4000-10000 TL3 BH three-phase without UP RS232 ShineWiFi-S, Shine Link LANbox (+ RF stick) The ShineWiFi-X does not fit here
SPH 4000-10000 TL3 BH-UP three-phase USB ShineWiFi-X, Wilan-X2, ShineLAN-X “BH-UP” is printed on the type label
SPA 1000-3000 TL BL and SPA 4000-10000 TL3 BH(-UP) battery inverters usually RS232 ShineWiFi-S Check the port on the underside (see below) or ask us
SPF 3000TL / 3500-6000 ES (off-grid) WiFi/GPRS port ShineWiFi-F ShineWiFi-S and -X do not fit an SPF
Older S series: 750S-3000S, MTL-S, TL3-S, UE RS232 ShineWiFi-S, Shine Link LANbox, ShineLAN (without X)
NEO 600-1000M-X microinverter built in no dongle needed (WiFi version) NEO …-RF version: ShineWeLink (max. 5 units)
NEXA 2000, NOAH 2000 plug-in battery built in no dongle needed (WiFi + Bluetooth built in)
APX / ARK / AXE home battery, BMS – no dongle needed The battery talks via the inverter; the dongle goes on the inverter

Not sure? Look at the underside of the inverter: a round socket with a screw cap (you twist the dongle to lock it) = USB = X dongle. A rectangular 9-pin connector behind a plate marked “RS-232” (the dongle is fixed with two screws) = ShineWiFi-S. If the type label of your SPH says “UP”, it is always an X dongle.

Weight 0.11 kg
Brand

Growatt
Kiyoh reviews