In stock
Growatt Shine Link X

Shine Link-X

SKU: 127325

Original price was: €25.00.Current price is: €19.00. (0% BTW)

Fits: Growatt inverters with a USB port (MIN, MIC, MOD, MID, MAX, SPH-UP); extra inverters via RF Stick-X (Link-X) or RF Stick X2 (Link-X2). Does NOT fit: SPH/SPA without UP and the old S series – use the Shine Link LANbox (RS232) for those. Not for the off-grid SPF either.

Monitor the Growatt X series inverter with the Shine Link-X, without having to run a LAN cable and without using WiFi. Growatt’s proprietary communication protocol reaches up to 20 metres indoors, or up to 120 metres in the free field.

Especially for Growatt’s new X series inverters, with a USB port.

Datasheet

MPN: Shine Link-X

Delivery on Tuesday 27 October — for €6.95, shipped (incl. 0% VAT).

1267 in stock (can be backordered)

1 stuk
€19.00
20+ stuks
€17.10 (10% off)

The Growatt Shine Link-X allows you to monitor your solar panels without having to run a LAN cable and without using Wi-Fi.

This updated version is especially for Growatt’s new XE inverters. The Growatt Shine Link-X comes with a USB communication port and contains 1 month of storable data. It has a range of up to 120 metres.

Place the Shine Link-X next to the router and connect it with a short LAN bell. The Shine Link-X communicates with the inverter via the supplied RF Stick-X, which you place under the inverter. The radio connection established can connect over about 120 metres in the free field, and over 20 metres with 2 walls between them. Because of the connection to the router, you can monitor your set via Growatt’s server on the computer, or via the shinephone app on the tablet or smartphone.

Link up to 6 inverters to the Shine Link-X, by equipping each additional inverter with a Growatt RF stick!

Especially for Growatt’s new X series inverters, with a USB port.

For more information, take a look at the datasheet, or visit growatt‘s website.

Datasheet Manual Growatt's security actions

https://www.stralendgroen.nl/wp-content/uploads/2020/01/Growatt-Shine-lanbox-installeren.pdf

Which Growatt dongle fits my inverter?

Growatt has two families of monitoring dongles. Everything with an X or X2 in the name (ShineWiFi-X, Wilan-X2, ShineLAN-X, Shine Link-X/X2, Shine RF Stick X2, Shine GPRS-X) plugs into the USB port. The ShineWiFi-S, Shine Link LANbox and the old ShineLAN plug into the RS232 port. The ShineWiFi-F is only for the off-grid SPF series.

Inverter series Port Correct dongle Note
MIN 2500-6000 TL-X / TL-XE / TL-XH / TL-XH2 USB ShineWiFi-X, Wilan-X2, ShineLAN-X, Shine Link-X/X2 Also Shine GPRS-X (2G/SIM card)
MIC 600-3300 TL-X / TL-X2 USB ShineWiFi-X, Wilan-X2, ShineLAN-X, Shine Link-X/X2
MOD 3-15K TL3-X / TL3-XH (BP and non-BP) / TL3-HU USB ShineWiFi-X, Wilan-X2, ShineLAN-X, Shine Link-X/X2 For the HU series Growatt recommends Wilan-X2 or ShineWiFi-X
MID 11-30K TL3-XH / XHL, MID 17-50K TL3-X / X2 USB ShineWiFi-X, Wilan-X2, ShineLAN-X, Shine Link-X/X2
MAX 50-125K TL3 LV (MAX, MAX 2) USB ShineWiFi-X, Wilan-X2, ShineLAN-X Several inverters: Shine Master X (RS485)
SPH 3000-6000 single-phase without UP (SPH 3000-6000 TL BL) RS232 ShineWiFi-S, Shine Link LANbox (+ RF stick) The ShineWiFi-X does not fit here
SPH 3000-6000 TL BL-UP single-phase USB ShineWiFi-X, Wilan-X2, ShineLAN-X “BL-UP” is printed on the type label
SPH 4000-10000 TL3 BH three-phase without UP RS232 ShineWiFi-S, Shine Link LANbox (+ RF stick) The ShineWiFi-X does not fit here
SPH 4000-10000 TL3 BH-UP three-phase USB ShineWiFi-X, Wilan-X2, ShineLAN-X “BH-UP” is printed on the type label
SPA 1000-3000 TL BL and SPA 4000-10000 TL3 BH(-UP) battery inverters usually RS232 ShineWiFi-S Check the port on the underside (see below) or ask us
SPF 3000TL / 3500-6000 ES (off-grid) WiFi/GPRS port ShineWiFi-F ShineWiFi-S and -X do not fit an SPF
Older S series: 750S-3000S, MTL-S, TL3-S, UE RS232 ShineWiFi-S, Shine Link LANbox, ShineLAN (without X)
NEO 600-1000M-X microinverter built in no dongle needed (WiFi version) NEO …-RF version: ShineWeLink (max. 5 units)
NEXA 2000, NOAH 2000 plug-in battery built in no dongle needed (WiFi + Bluetooth built in)
APX / ARK / AXE home battery, BMS – no dongle needed The battery talks via the inverter; the dongle goes on the inverter

Not sure? Look at the underside of the inverter: a round socket with a screw cap (you twist the dongle to lock it) = USB = X dongle. A rectangular 9-pin connector behind a plate marked “RS-232” (the dongle is fixed with two screws) = ShineWiFi-S. If the type label of your SPH says “UP”, it is always an X dongle.

Growatt RF stick-X

Weight 0.517 kg
Brand

Growatt
Kiyoh reviews