Sleeve Bitumen SBS (Bauder) v2

The QS PV-anker is the solution for installing solar panels on roofs with widely differing properties, such as flat, slightly sloping and sloping roofs.
Regardless of the type of roof covering, whether it is bitumen, EPDM or PVC, the QS PV-ankers can be used.

Even on difficult roofs with unevenness, a slight slope or where ballasting is not an option, the QS PV-ankers offer a solution.
Where it was previously not possible to install solar panels on these roofs, thanks to the QS PV-ankers it now is!

It can be used for both sloping roofs and flat roofs.

The QS PV-anker is firmly attached to the roof structure and sealed completely watertight.
Besides the advantages of the reduced load on the roof, the QS PV-anker also preserves important functions of the roof, such as water drainage.
Moreover, using the QS PV-anker puts an end to the risk of damage to the roof covering caused by systems shifting.

Please note!!
You can combine the anchor with the F-adapter. In that case you have no warranty on this assembled product, because this combination has not been tested.
You screw the anchor with 4 screws (not included in the quotation) through your bitumen and insulation, through your roof decking. You then place the sleeve over it to make it watertight. A hanger bolt is no longer needed.