SolarEdge Home Hub 1-phase SE6000H-RWB – 6 kW hybrid inverter with HD-Wave

The SolarEdge Home Hub 1-phase SE6000H-RWB is a 6 kW hybrid inverter for homes with a 1-phase 230 V connection. This inverter combines SolarEdge’s well-known panel-level optimiser system with an integrated connection for a high-voltage home battery. Thanks to HD-Wave technology, it is extremely efficient, compact and lightweight, making it ideal for both new installations and replacement of older inverters.

In the official datasheet, this type is referred to as StorEdge 1-phase inverter SE6000H with HD-Wave. In practice, it is increasingly marketed as SolarEdge Home Hub: one central inverter that brings together PV, battery and smart consumers.

Why choose the SolarEdge Home Hub SE6000H-RWB?

• 6 kW 1-phase AC power – suitable for most residential installations with a 1-phase main connection.
• Battery-ready – direct connection for a high-voltage home battery (SolarEdge Home Battery / compatible HV battery, depending on version).
• Panel-level optimisation – works with SolarEdge power optimisers; each panel its own MPP, more yield under shade and different orientations.
• HD-Wave technology – very high inverter efficiency (maximum around 99%) in a compact, lightweight housing.
• 1-phase, 230 V – easy to fit into a home’s existing distribution cabinet.
• SetApp built-in – commissioning via your smartphone; no display, but a built-in WiFi access point for configuration.
• Smart Energy ready – support for export limitation and Smart Energy products (relays, load switches) via RS485/Ethernet/WiFi/Zigbee, depending on accessories.
• Indoor and outdoor mounting – IP65 enclosure, so suitable for shed, garage, facade or technical room.
• Long warranty – 12 years as standard, extendable to 20 or 25 years (via SolarEdge warranty extension).

Application: where does this inverter fit well?

The SolarEdge Home Hub SE6000H-RWB is ideal for:

• A new SolarEdge system with optimisers on each panel.
• Households that are already installing solar panels but want to add a home battery later.
• Roofs with multiple surfaces, dormers or (partial) shade, where panel level optimisation makes all the difference.
• Single-phase connections where you need around 6 kW of inverter power.

Main technical specifications (summary)

• Model: SE6000H-RWB (SolarEdge Home Hub / StorEdge 1-phase SE6000H)
• Nominal AC power: 6,000 VA
• Maximum AC power: 6,000 VA
• Mains voltage: 220/230 V, single-phase
• AC frequency (nominal): 50/60 Hz
• Maximum continuous AC output current: approx. 27.5 A
• Total harmonic distortion (THD): < 3%
• Power factor: adjustable, standard around 1 (cos φ 0.9 ind. to 0.9 cap.)

DC (PV input)

• Maximum permissible PV power: approx. 9.3 kW DC
• Maximum DC input voltage: 480 Vdc
• Nominal DC voltage: 380 Vdc
• Maximum input current: approx. 16.5 A
• Maximum inverter efficiency: up to approx. 99.2%
• Weighted European efficiency: up to approx. 99%

DC (battery input, high voltage)

• Type: high-voltage battery, connected via dedicated battery port
• Compatibility: depending on version e.g. LG Chem RESU HV / SolarEdge Home Battery
• Maximum continuous charge/discharge capacity: approx. 5,000 W
• Peak (short-term): approx. 7,000 W (10 seconds)
• Maximum battery voltage: 480 Vdc

General & installation

• Protection class: IP65 (can be used outdoors and indoors)
• Cooling: natural convection (no active fan, very quiet)
• Noise level: < 25 dB(A)
• Operating temperature range: approximately -40 °C to +60 °C (with power derating at higher temperatures)
• Communications: RS485, Ethernet, WiFi (with external antenna), optional GSM and Zigbee for Smart Energy
• Dimensions: compact, approx. 45 × 37 × 17 cm
• Weight: around 11-12 kg

Note: exact values may vary from revision to revision. Always consult the official SolarEdge datasheet for detailed values and country settings.

Installation tips for do-it-yourselfers

The SolarEdge Home Hub combines well with DIY, but the final grid connection should be done by a certified installer in most cases. Some practical tips:

• 1. Always work with SolarEdge optimisers
  This inverter is specifically designed for use with optimisers on each panel. Choose the right type of optimiser (e.g. S series) based on panel power and string design.
• 2. String design according to SolarEdge rules
  SolarEdge works with a fixed string design. Adhere to the minimum and maximum number of optimisers per string and per inverter. Preferably use the SolarEdge Designer tool for a correct calculation.
• 3. AC connection in the distribution cabinet
  A 6 kW single-phase inverter requires a suitable end group and cable cross-section. Have this part carried out or checked by a certified installer and follow the requirements of the grid operator.
• 4. Battery preparation
  Do you want to connect a SolarEdge home battery later? Then reserve space next to the inverter now, and consider cable routes between inverter, battery and any smart meter / gateway.
• 5. SetApp commissioning
  Commissioning is done via the SolarEdge SetApp on your smartphone. The inverter itself creates a WiFi access point; with this you set the basic configuration, country code, communication and any export restriction.
• 6. Indoor or outdoor installation
  Mount the inverter on a solid wall, vibration-free and out of direct sunlight. Leave enough free space around it for cooling and access to the connections.

Buy SolarEdge Home Hub SE6000H-RWB from Radiant Green

At Stralendgroen, we are happy to help you complete your SolarEdge system: inverter, optimisers, cabling, smart monitoring and (future) battery. We are happy to think with you about a string design that suits your roof, consumption and grid connection.

Are you unsure between several SolarEdge inverters or do you want to make sure the SE6000H-RWB fits your installation? Feel free to send us an overview of your plans or a picture of the meter box, and we will calculate with you.

For more information, also take a look at the datasheet, or the SolarEdge website.