Solarstell Connect base element east-west 2080

Solarstell Connect base element east-west 2080 is part of a durable mounting system for solar panels up to 1055mm wide. Other requirements such as ballast trays and back plates can be found separately on the website.

The base element is step 1 of the mounting plan. Start the installation by setting out the base elements. At the same time, click the upright into position. The free space from the roof edge is 1,20 up to a roof height of 8 metres, and 1,60 at a roof height between 8 and 12 metres. Above 12 metres, advice is needed for each situation. To mount 2 panels east-west, 2 base elements are needed. With 4 panels, 3 are needed. The middle base element is then shared.

Please note! Back plates are mandatory with the Solarstell Connect mounting system in those places where no panel is placed behind. Use ballast trays to weigh down the system. Side plates are not mandatory.