Solarstell Connect Base Element East-West 2280

The Solarstell Connect base element east-west 2280 is part of a durable mounting system for solar panels up to 1155mm wide. Other items you need, such as ballast trays and back plates, can be found separately on the website.

The base element is step 1 of the mounting plan. Start the installation by setting out the base elements. Click the upright into place at the same time. The clearance from the roof edge is 1.20 up to a roof height of 8 metres, and 1.60 for a roof height between 8 and 12 metres. Above 12 metres, advice is required for each individual situation. To mount 2 panels east-west you need 2 base elements. For 4 panels you need 3. The middle base element is then shared.

Please note! Back plates are mandatory in the Solarstell Connect mounting system in every place where no panel is positioned behind. Use ballast trays to weigh down the system. Side plates are not mandatory, and are not made for these base elements either.