|
|
Enphase IQ7+ Micro-inverter
The Enphase IQ7+ micro-inverter is suitable for 60 and 72 cell solar panels and has a maximum output power of 295 watts at peak times. You can connect between 235 and 440 Watt peak to it without any problems, but then the number of watts generated above 295 will be capped. Check compatibility with your panels in Enphase's compatibility calculator!
You need 1 micro-inverter per panel. An inverter produces 1.26 amps, so a maximum of 12 panels can be placed on a 16-amp group.
Please note that the warranty of these inverters also requires an envoy and a relay to be connected to them!
Productsheet
Installation video
€49.00 each (0% BTW)
Out of stock
|
|
|
|
Enphase IQ7A Micro-inverter
The Enphase IQ7A microinverter is fully equipped for a smart grid, reliable, robust and easy to install.
The Enphase IQ7A microinverter is suitable for 60 and 72 cell solar panels and has a maximum output power of 340 watts at peak times. You can connect between 295 and 460 Watt peak to it without any problems, but then the number of watts generated above 340 will be capped. Check compatibility with your panels in Enphase's compatibility calculator!
You need 1 micro-inverter per panel. An inverter produces 1.52 amps, so a maximum of 10 panels can be placed on a 16-amp group.
Please note, to guarantee these inverters, an envoy and a relay must also be connected to them!
Productsheet
Installation video
€59.00 each (0% BTW)
115 in stock (can be backordered)
|
|
|
|
Enphase IQ8+ Microinverter
New IQ8+. While stocks last. Slight warehouse damage caused by shifting.
The Enphase IQ8+ microinverter is fully geared to a smart energy grid: reliable, robust and easy to install. The great thing about these microinverters is that they are prepared for island operation in software. Please note that you need the IQ system controller to make this work properly and safely.
The Enphase IQ8+ microinverter has a maximum output power of 300 watts at peak moments. You can connect up to 440 watt peak to it without any problem, but the watts generated above 300 will then be capped. Check the compatibility with your panels in the Enphase compatibility calculator!
Suitable for solar panels with 54 (or 108 half) , 60 (or 120 half) and 72 (or 144 half) cells.
You need 1 microinverter per panel. One inverter produces 1.30 amps, so a maximum of 12 panels can be placed on a 16 amp group.
Please note: for the warranty on these inverters an Envoy and a relay have to be connected as well! The IQ8 cannot be combined with the IQ7 series. You also need the Envoy to commission the IQ8.
Datasheet
Installatievideo
€84.00 Original price was: €84.00.€80.00Current price is: €80.00. each (0% BTW)
Out of stock
|
|
|
|
Enphase IQ8M Micro-inverter
The Enphase IQ8M microinverter is fully equipped for a smart grid, reliable, robust and easy to install. The beauty of these micro-inverters is that they are software-prepared for island operation. Note that to make this work properly and safely, you need the IQ system controller.
The Enphase IQ8M microinverter has a maximum output power of 330 Watts at peak times. You can connect up to 480 Watt peak to it without any problems, but then the number of generated watts above 330 will be capped. Check compatibility with your panels in Enphase's compatibility calculator!
Suitable for solar panels with 60 (or 120 half) and 72 (or 144 half) cells.
You need 1 micro-inverter per panel. An inverter produces 1.43 amps, so up to 11 panels can be placed on a 16-amp group.
Please note that to guarantee these inverters, an envoy and a relay must also be connected to them! The IQ8 cannot be combined with the IQ7 series. Also, to commission the IQ8, you need the Envoy.
Datasheet
Installation video
€125.00 Original price was: €125.00.€80.00Current price is: €80.00. each (0% BTW)
Out of stock
|
|
|
|
Enphase IQ8MC Micro-inverter
The Enphase IQ8MC microinverter is fully equipped for a smart grid, reliable, robust and easy to install.
The Enphase IQ8MC microinverter has a maximum output power of 330 watts at peak times. You can connect up to 480 Watt peak to it without any problems, but then the number of generated watts above 330 will be capped. Check compatibility with your panels in Enphase's compatibility calculator!
Suitable for solar panels with 54 (or 108 half), 60 (or 120 half) and 72 (or 144 half) cells.
You need 1 micro-inverter per panel. An inverter produces 1.43 amps, so a maximum of 11 panels can be placed on a 16-amp group.
Please note that to guarantee these inverters, an envoy and a relay must also be connected to them! The IQ8 cannot be combined with the IQ7 series. Also, to commission the IQ8, you need the Envoy.
Datasheet
Installation video
€90.00 each (0% BTW)
2 in stock
|
|
|
|
Enphase IQ8AC Micro-inverter
The Enphase IQ8AC microinverter is fully equipped for a smart grid, reliable, robust and easy to install.
The Enphase IQ8AC microinverter has a maximum output power of 360 watts at peak times. You can connect up to 530 Watt peak to it without any problems, but then the number of generated watts above 360 will be capped. Check compatibility with your panels in Enphase's compatibility calculator!
You need 1 micro-inverter per panel. An inverter produces 1.59 amps, so a maximum of 10 panels can be placed on a 16-amp group.
Please note, to guarantee these inverters, an envoy and a relay must also be connected to them! The IQ8 cannot be combined with the IQ7 series. Also, to commission the IQ8, you need the Envoy.
Suitable for solar panels with, 60 (or 120 half) and 72 (or 144 half) cells.
Datasheet
Installation video
€115.00 Original price was: €115.00.€102.00Current price is: €102.00. each (0% BTW)
367 in stock (can be backordered)
|
|
|
|
Enphase IQ8HC Micro Inverter
The Enphase IQ8HC microinverter is fully equipped for a smart grid, reliable, robust and easy to install.
The microinverter has a maximum output power of 380 watts at peak times. You can connect up to 560 Watt peak without any problems, but then the number of generated watts above 380 will be capped. Check compatibility with your panels in Enphase's compatibility calculator!
Suitable for solar panels with, 60 (or 120 half) and 72 (or 144 half) cells.
You will need 1 micro-inverter per panel. An inverter produces 1.67 amps, so up to 9 panels can be placed on a 16-amp group.
Please note that to guarantee these inverters, an envoy and a relay must also be connected to them! The IQ8 cannot be combined with the IQ7 series. Also, to commission the IQ8, you need the Envoy.
Datasheet
Installation video
€135.00 Original price was: €135.00.€109.00Current price is: €109.00. each (0% BTW)
Available on back-order
|
|
|
|
Enphase Envoy-S Standard
Enphase Envoy-S Standard communication gateway.
Simple gateway to enable WiFi or LAN connection to your Enphase microinverters. To accurately monitor your system.
Datasheet
15 in stock (can be backordered)
|
1
|
|
|
Enphase Gateway Envoy-S Metered
Enphase Envoy-S Metered communication gateway.
Simple gateway to enable WiFi or LAN connection to your Enphase microinverters. To accurately monitor your system.
Also measure your consumption, or prepare your system for Enphase batteries by adding more CT clamps! 2 ct clamps are included as standard
Suitable for single-phase and three-phase systems.
Datasheet
15 in stock (can be backordered)
|
1
|
|
| |
4
|
|
|
Enphase Q relay 3-phase
Enphase Q-relay 3-phase ensures safe mechanical disconnection in case of grid voltage loss and seamless re-enablement. Easy installation, max 20A of micro inverters per phase, and convenient LED indicator for status information. Built-in phase coupler for advanced monitoring. Configurable on 1, 2 or 3 phases. Let your solar panels shine!
Datasheet
€135.00 Original price was: €135.00.€99.00Current price is: €99.00. each (0% BTW)
226 in stock (can be backordered)
|
|
|
|
Prewired 3-phase distribution board with Enphase Q relay
The pre-wired group box with Enphase Q-relay 3-phase is an extension for the existing group box. Especially for Enphase systems, the 3-phase Q-relay is already built in!
In the Schneider Electric distribution box you will find the Chint residual current device B16A 30mA (4-pole), the Enphase relay 3-phase and 4 ferrite rings. Everything is already pre-wired so that saves a lot of time on installation!
3 in stock (can be backordered)
|
1
|
|
|
Enphase Q-Cable portrait single-phase
Enphase Q-Cable portrait main 1-phase cable with integrated connection for Enphase's IQ7/IQ8 Micro-inverters.
The distance between the connections is 1.3 metres. This cable is therefore suitable for portrait placement of solar panels.
Choose the number of connectors. These are supplied in 1 piece, with 1.3 metres between connectors each! The ends of the cable are open and must be terminated with either a junction box, a connector with a waterproof cap or a sealing cap .
Datasheet
€14.00 Original price was: €14.00.€13.00Current price is: €13.00. each (0% BTW)
151 in stock (can be backordered)
|
|
|
|
Enphase Q-Cable landscape 1-phase 2m
Enphase Q-Cable portrait main 1-phase cable with integrated connection for Enphase's IQ7/IQ8 Micro-inverters.
The distance between the connections is 2 metres. This cable is thus suitable for landscape installation of solar panels with 60 cells....
Choose the number of connectors. These are supplied in 1 piece, with 2 metres between connectors each time! The ends of the cable are open and must be closed with either a junction box, a connector with waterproof cap or a sealing cap.
Datasheet
€20.00 Original price was: €20.00.€13.00Current price is: €13.00. each (0% BTW)
7204 in stock (can be backordered)
|
|
|
|
Enphase Q-Cable End cap 1-phase
€11.00 Original price was: €11.00.€5.00Current price is: €5.00. each (0% BTW)
2879 in stock (can be backordered)
|
|
|
|
Enphase Q-Cable connector Male
Enphase Q-Cable connector Male to connect Q-Cables together. MC-4 pliers are required to attach these connectors.
This connector also fits the Enphase IQ7+ micro-inverter. It is therefore possible to use this connector, instead of a Q-cable end cap, reducing the need for a length of Enphase Q-cable.
Datasheet
Installation video
€8.00 Original price was: €8.00.€4.00Current price is: €4.00. each (0% BTW)
5687 in stock (can be backordered)
|
|
|
|
Enphase Q-Cable connector Female
Enphase Q-Cable connector Female to connect Q-Cables together. MC-4 pliers are required to attach these connectors.
Datasheet
Installation video
€9.00 Original price was: €9.00.€4.00Current price is: €4.00. each (0% BTW)
5523 in stock (can be backordered)
|
|
|
|
Enphase Q-Cable portrait 3-phase
Enphase Q-Cable portrait main 3-phase cable with integrated connection for Enphase's IQ7/IQ8 Micro-inverters.
The distance between the connections is 1.3 metres. This cable is therefore suitable for portrait placement of solar panels.
Choose the number of connectors. These are supplied in 1 piece, with 1.3 metres between connectors each! The ends of the cable are open and must be terminated with either a junction box, a connector with a waterproof cap or a sealing cap.
Datasheet
€20.00 Original price was: €20.00.€16.00Current price is: €16.00. each (0% BTW)
331 in stock (can be backordered)
|
|
|
|
Enphase Q-Cable landscape 3-phase
Enphase Q-Cable landscape main 3-phase cable with integrated connection for Enphase's IQ7/IQ8 Micro-inverters.
The distance between the connections is 2 metres. This cable is thus suitable for landscape installation of solar panels with 60 cells....
Choose the number of connectors. These are supplied in 1 piece, with 2 metres between connectors each time! The ends of the cable are open and must be closed with either a junction box, a connector with waterproof cap or a sealing cap.
Datasheet
€24.00 each (0% BTW)
90 in stock (can be backordered)
|
|
|
|
Enphase Q-Cable End cap 3-phase
€13.00 Original price was: €13.00.€9.50Current price is: €9.50. each (0% BTW)
38 in stock (can be backordered)
|
|
|
|
Enphase Q-Cable connector Male 3-phase
Enphase Q-Cable connector Male 3-phase to connect 3-phase Q-Cables together. MC-4 pliers are required to attach these connectors.
€18.00 Original price was: €18.00.€5.00Current price is: €5.00. each (0% BTW)
4168 in stock (can be backordered)
|
|
|
|
Enphase Q-Cable connector Female 3-phase
Enphase Q-Cable connector Female 3-phase to connect 3-phase Q-Cables together. MC-4 pliers are required to attach these connectors.
Datasheet
Installation video
€18.00 Original price was: €18.00.€5.00Current price is: €5.00. each (0% BTW)
1942 in stock (can be backordered)
|
|
|
|
Enphase Q-Cable waterproof end cap
Enphase Q-Cable waterproof termination cap for Enphase IQ7(+) microinverters. To seal unused connectors safely and watertight.
Click on the datasheet or check the Enphase website for more information.
Datasheet
76 in stock (can be backordered)
|
|
|
|
UV-resistant cable per metre
|
|
|
|
|
|
|
|
|
|
EM Electronics casting sleeve package
EM Electronics casting sleeve package to make a watertight connection at the transition of AC cabling such as YMVK or neoprene. Avoid insulation errors!
The package contains:
- 286ml Cellpack resin
- 1 junction box IP54 with 7 inputs
- 3 cable glands M25x1.5 IP68
- 4 4-fold welding clamp
- 1 connector 10m2 for earth wires
- set of gloves
Note: If you want to connect the flexible cable, you will need a welding clamp, as a crown block can damage the individual wires, causing resistance.
Step 1: Place the cable glands on the cable box and tighten them, loosening the sealing plates.
Step 2: Strip the cables. In the case of ground cable, cut away the steel sheath and free the ground lug. Feed the cables through the cable glands into the cable box and tighten the glands.
Step 3: Connect the wires using the welding clamps and, if necessary, the earth titze with the supplied terminal block.
Step 4: Check the function of the connections before pouring in the resin!
Step 5: Put on the gloves and remove the sealing strip from the casting resin
Step 6: Cut a corner from the casting resin packaging and carefully pour the contents into the cable box.
Step 7: Let the resin-filled cable box cure for 1 hour.
Step 8: Screw the lid onto the cable box.
Step 9: Optionally dig the cable box into the ground and make sure it is completely covered.
21 in stock (can be backordered)
|
|
|
|
Wago cable clamp 221
Wago cable clamp 221
Suitable for solid and multi-stranded cable diameters up to 4 mm2
|
|
3 draden |
|
|
|
|
Wago cable clamp 221
Wago cable clamp 221
Suitable for solid and multi-stranded cable diameters up to 4 mm2
|
|
5 draden |
|
|
|
|
Earth cable 6mm2
UV-resistant earth cable. Price is per metre.
€1.37 each (0% BTW)
210 in stock
|
|
|
|
Cable lug for earth wire
Cable lug for earth wire to attach earth wire 6mm to the kit.
The cable lug with a 6mm hole is suitable for connection to the earth rail in the meter box, or to inverter. This format is also suitable for attachment to the panel frame. For fixing to the mounting rails, a cable lug with an 8mm hole is recommended, in combination with a roof hook bolt M8.
|
|
|
|
|
|
| |
|
|
|
Enphase Q-Cable disconnection key
Enphase Q-Cable disconnection tool for Enphase IQ micro-inverters. To safely disconnect the connectors of the Enphase system, you need special tools. If you use other tools, you can easily damage the waterproof seal.
Click on the datasheet or check the Enphase website for more information.
Datasheet
300 in stock (can be backordered)
|
1
|
|
|
RCBO 3-phase 16 amp Chint
For safety reasons, an RCBO is recommended by the NEN when connecting solar panels to a separate circuit. The Chint 3-phase RCBO is suitable for three-phase inverters with a maximum output current of up to 16 amps. The Chint 3-phase RCBO is suitable for meter cabinets with a DIN rail.
€65.05 each (0% BTW)
135 in stock
|
|
